Policy Routing “Route Traffic Through VPN”

Digi TransPort WR (Series)
, , , ,
1

Hi,

I have a DIGI router that is on range 192.168.10.0/24

Basically I want to return everything from range 192.168.20.0/24 if router to the DIGI via the VPN tunnel from the server. This is today done on a Zyxel with Policy Routing “Route Traffic Through VPN”

I am not able to find any information in the manual / config page in regards to this on the DIGI router.

Thanks
Martin

2

Hi

if you are using ipsec VPN on a WAN interface.
all traffic should be going to the wan interface when ipsec is enabled on the wan interface the trafic is tested to see if it matches the eroute network selector src/dst address ranges if it is and the vpn is up the router will sent the trafic over the vpn tunnel so policy based routing is not needed.

regards

James