Routing Table Request Analyze the response

XBee & XBee Gateway
, , ,
1

Hi
I’m trying to use ZDO Routing Table Request
( Cluster ID : 0032 )

I’m using two xbee now.
one is cordinator API and the other is router API

I add the API frame in the cordinator xbee

this is the configuration of the frame

7E 00 16 11 01 00 13 A2 00 40 E2 D6 99 FF FE 00 00 00 32 00 00 00

00 01 00 77

next i send the frame and received “Explicit RX Indicator”
this is the RF data of “Explicit RX Indicator”.

F3 00 28 1E 0A 00 00 03 00 00 00 00 03 00 00 00 00 03 00 00 00 00

03 00 00 00 00 03 00 00 00 00 03 00 00 00 00 03 00 00 00 00 03 00

00 00 00 03 00 00 00 00 03 00 00

my question is,
the RF data that i noted above contain a routing table?
if so, how can i read it ?

My RF data show just only the number 00 and 03.

2

You need to get a copy of the Zigbee standard. Then you need to look up the specific ZDO command frame and what the responds is to be.