Running a lightweight application code onto the Xbee ZB module.

XBee & XBee Gateway XBee Programamble (S2C & 900 HP)
,
1

Hi,

Is there any possibility where I can run a light weight application code onto the Xbee ZB module itself, elimination the need for an external microcontroller ??

Thanks,
Gaurav

2

Programmable XBee ZB…

http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/zigbee-mesh-module/xbee-zb-module

Particularly:
Programmability
Memory 32 KB Flash / 2 KB RAM)
CPU/Clock Speed HCS08 / Up to 50.33 MHz

Have a read in the manual here:
http://ftp1.digi.com/support/documentation/90000976_T.pdf

The S2B modules that have the programmable option populated have a secondary processor with 32k of flash
and 2k of RAM. This allows module integrators to put custom code on the XBEE module to fit their own unique
needs.