Setting XBee S2 UART to 250kbps

idrox · July 26, 2015, 5:47pm

Is it possible to configure the XBee S2 UART at 250kbps?

I could not find any specific documentation on the non-standard baud rates.

Thanks.

mvut · September 2, 2015, 1:54pm

Yes it is but most devices don’t support that rate and the throughput is considerably less.

Topic		Replies	Views
XbeeZB s2 throughput ZNet 2.5 xbee , s2 , throughput , datarate	1	547	December 10, 2013
XBee Throghput not have 250kbps XBee - Zigbee throughput , 250kbps	1	466	March 9, 2017
XBee S2 Throughput very Low ? XBee - 802.15.4 xbee , 250kbps	3	576	January 18, 2016
XBee Max Baud Rate Problems XBee - 802.15.4 xbee-pro , xbee , xctu , baud , rate	1	1541	December 30, 2014
XBee stop to comunicate after baud rate change ZNet 2.5 api , xbee , s2 , baud , rate	1	1531	May 13, 2014