Hi, I have one xbee end device API with SM=1 option with following settings:
SM=1 (Pin hibernate)
ST=1F4 (500msec awaked)
SP=0;
SN=0;
SO=0;
PO=0;
IR=3E8 (1sec for Sampling time;just one data packet )
Then In the Coordinator API I set the same PANID ,DH=0,DL=ffff to receive from any end device !
The problem is that when i put the dtr to ground ,on end device ,no packets are received into the coordinator terminal! I wonder if I have to set other parameters into the coordinator profile (like SP or SN)!
An help will be appreciated ,
thanks in advance!