Hello all,
I have a ConnectCore 9M Development Kit. I tried to download the U-Bootloader for Samsung 2440. This worked fine an ok. I put all the Dipswitches back and restarted the system.
Now i have the following messages, when i start the ConnectCore 9M Evaluation Kit (there is a part missing). I dont see the CPU info and the A9M24x0# output. I can not enter information. The banks are not ok too.
Output start -------
U-Boot 1.1.2 (Apr 6 2005 - 15:24:55) FS.3
U-Boot code: 30580000 -> 305A8768 BSS: -> 305EB094
RAM Configuration:
Bank #0: 30000000 128 MB
NAND: 0 MB
In: serial
Out: serial
Err: serial
Output end ----
Can someone tell me, how to configure the system correctly. What went wrong?
Thanks
Mario Borer