using master slave examples

Rabbit
1

I am having trouble using the Master Slave examples provided.

  • I have a RCM3100 board in both the master and slave socket on the prototype boards.

  • The prototype board has been updated according to the data sheet (That is I have connected one side of R14 to the 3.3 Volt line).

  • I have removed the LCD/Keypad unit .

  • I have a debug cable connected to both RCM units.

  • I have loaded the master RCM3100 with the sample application “MASTER_DEMO.C”

  • I have loaded the slave RCM3100 with the sample application “SLAVE_DEMO.C”
    -Both applications successfully run however I get no communication between the boards.

    Can you please help me out here.