A X2e SE router connected to the Device Cloud to a smart meter will not automatically poll attribute to store data. The only way to receive data in the data service in the device cloud I have to manually click 0x702 endpoint 0x10 read attributes in order receive updated data. The data point will not continue poll the attribute if the point is not manually clicked from the web interface?
Is is possible that the reporting is not set up?
https://digi-se.appspot.com/edocs/interface_reference/RPC_ZCL_Interface.html#interface-start-reports
1 Like
Also, you might want to confirm NTP time is successfully synchronizing. This can be checked from the Device Cloud under the Device Properties > System Information > Device statistics. Click Refresh to get the latest time reading. If the time is off, make sure port 123 is open on your corporate firewall.