XB24CZ7PIS-004 how the heck to get started

XBee & XBee Gateway
1

I am getting quite frustrated in trying to get started with the SMT XB24CZ7PIS-004 device. I have found no quick start guides which show hot to connect to, configure and getting running with these devices.

In the least it would be nice to be able to connect to XCTU and have it see the device to configure. Or at least instructions in the datasheet about how to connect to XCTU to configure and run.

I have been through the device “datasheet” and it does not seem to describe any of this.

If I am missing something blatant please enlighten me or, digi please explain how the heck I am supposed to get started with this thing.

2

The quick start guide is located at http://ftp1.digi.com/support/documentation/9000200488_a.pdf.

3

Unfortunately this guide only links to a digi website with the actual instruction. to “instructions”. The link must be the incorrect as it gives an " page error" on the linked digi page.

dead linked page:
http://www.digi.com/zb_smtmodule_dk

Can someone give me the actual link with the instructions?

4

Try http://www.digi.com/products/xbee-rf-solutions/rf-modules/xbee-zigbee#productsupport

Then Select the Quick Start Guide: XBee ZB SMT RF Module Development Kit to see how to mount the XBee modules on the boards.

Select the XCTU Configuration & Test Utility Software User Guide to see how to use XCTU and the XBee ZB modules.

5

If you find a dead link, use the Give Feedback button to report it as such.