Xbee 3 Pro pairing power-up period

Hi guys, I would like to know if the Xbee 3 Pro provides some automatic pairing mode for a few seconds on power up.

My goal is the possibility of master / slave pairing could be done directly in a period of for example 10 seconds.

I am reading datasheet and other information from the manufacturer if any of you can direct me to an article or tutorial available on the internet, or any similar topic from the group would be extremely grateful

Matheusdsg,

I believe what you are looking for is the Association function and the Node Join (NJ) command.

https://www.digi.com/resources/documentation/digidocs/90001539/#concepts/c_zb_coord_op.htm%3FTocPath%3DZigbee%2520networks|Zigbee%2520Coordinator%2520operation|_____0

https://www.digi.com/resources/documentation/digidocs/90001539/#reference/r_cmd_nj.htm%3FTocPath%3DAT%2520commands|Networking%2520commands|_____6

Digi Support