AnywhereUSB 14 Client multiple BSOD occur

MY anywhereUSB/14

  1. Server Firmware Version:
  2. Client OS: windows 2008 r2 X64 and windows 7 sp1 x64
  3. Client Version:3.82.207

Server exceptions:

#> show panic

Boot(s) since last exception: 2 Number of exceptions detected: 0
Last fault was an exception. (‘show panic e’)
(‘set panic c’ to clear buffers)

Exception type: 0x52 (Assertion failed)
Parameters: 0x000005f7 0x00000000 0x00000000 0x00000000

Occurred at: “client.c” line 1527
Message: Info->InterfaceNumber < MAX_INTERFACES

Version: v1.83.1733 Flags: 0x0 Uptime: 14 minutes 25 seconds

epc 0x8022bca8 status 0x0000ff01 cause 0x80800000 errepc 0xa50e2382
hi 0x0000270f lo 0x00001388 pc 0x80092750
r0 0x00000000 r1 0x00000001 r2 0x00000000 r3 0x000005f7
r4 0x00000052 r5 0x802de3fd r6 0x802de3f4 r7 0x000005f7
r8 0x00000000 r9 0x00000000 r10 0x00000000 r11 0x0000ff01
r12 0x00000000 r13 0x807fb1cc r14 0x00000000 r15 0x00000007
r16 0x80748db8 r17 0x807f6e64 r18 0x00000000 r19 0x00000000
r20 0x00000000 r21 0x8081a030 r22 0x00000040 r23 0x00000000
r24 0x00000004 r25 0x00000005 r26 0x80001328 r27 0x8000020c
r28 0x803c3020 r29 0x807fc220 r30 0x807fc220 r31 0x80092750

Stack 0x807fc248 0x800b0838 0x80748db8 0x807f6e48
0x00000000 0x807f6e64 0x806ae780 0x807f6e88
0x00000000 0x00000001 0x807fc268 0x800b062c
0x806ae780 0x807f6e48 0x00000000 0x800b04ac
0x80806168 0x00000024 0x807fc288 0x800b0224
0x806ae780 0x807f6e48 0x8071d024 0x8071c4ac
0x00000000 0x806ae780 0x807fc2a0 0x800af274
0x806ae780 0x806ae820 0x8071d024 0x8071c4ac
0x807fc2c0 0x800ae55c 0x8071d00c 0x806ae780
0x806ae820 0x807f6e48 0x807a2fc8 0x807f6e48
0x807fc2d8 0x801fca30 0x80745648 0x807fc330
0x00000000 0x80028358 0x807fc300 0x8002c7f8
0x80745648 0x807fc330 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x807fc330
0x807fc310 0x8002b600 0x80745648 0x00000000
0x807fc350 0x8002b364 0x80745648 0x00000000

Multi Client reboot multi time with CHECKBUG:0x00000009f

Below is the windbg output (after loading the memory dump of the crashed machines)

BugCheck 9F, {4, 258, fffffa8302841040, fffff80001458510}

Implicit thread is now fffffa83`02841040
*** ERROR: Module load completed but symbols could not be loaded for Awvusbd.sys
Probably caused by : NETIO.SYS ( NETIO!NmrpWaitForModuleDeregisterComplete+51 )

What kinds of USB devices are attached to the respective USB ports of this AnywhereUSB (meaning, the ports that are associated with the Group numbers that these two computers are connected to)?

Do these BSOD’s seem to happen “randomly” or at a certain time? Is there anything you can do to forcefully cause BSOD’s on these two computers?