AnywhereUSB not being detected on a different subnet

USB Edgeport
1

Hi,
I have connected AnywhereUSB to network 10.4.0.x and I installed the drivers on PC with IP 10.1.223.x.

But my PC is not detecting the device, it’s pinging though. If I connect the device also to the same subnet at the PC, it detects.

I am not sure if the ADDP protocol is enabled, but what I need to know is that will this device work from a different subnet. Because as I know about ADDP protocol, it uses multicast IP with TTL = 1.

So, if let’s say ADDP is enabled and the device is connected to 10.4.0.x subnet, will the PC on subnet 10.1.223.x detect this device or not??

Thanks,

2

Yes, you can devices in the different subnet to AUSB/5M
All you need to do is enter the IP address in the discovery list. This displays a list of subnet addresses of remote networks or IP Addresses of individual units where the configuration utility will search for AnywhereUSB units.