AnywhereUSB14 v.1.97 no power to USB

usamriid · October 18, 2019, 2:21pm

system was running good. upgrade firmware from 1.92 to 1.97, ran ok.
today, we have blinking green on the hub and no power to USB.

Ron · January 10, 2020, 2:30pm

Please open a case by emailing tech.support@digi.com if this is still an issue.

Ron
Digi Technical Support Engineer

Topic		Replies	Views
No power on the USB devices Edgeport firmware , post	4	929	September 3, 2015
Anyone know what a USB AnyWhere/14 status code of 2-3-3 red LED means and how to fix it? Edgeport usb , anywhereusb14 , leds	1	707	July 13, 2015
Firmware upgrade usb/14 POST update Edgeport firmware , upgrade	1	667	February 15, 2018
Unexpectedly AnywhereUSB 14W started blinking RED in 2-3-2 sequence. Factory reset does not work. How to repair? Edgeport usb , anywhereusb14 , leds , blink	4	1089	September 18, 2015
AnywhereUSB/14 is stop responding on the network Edgeport anywhereusb14 , disconnect , blinking-code	3	661	March 25, 2016