No power on the USB devices

USB Edgeport
,
1

Hello!

Purchased Digi AnywhereUSB / 5 G2

The site digi/support I could not find the file for the firmware POST. Now the device is working, WEB interface is available, but USB devices do not connect they are not powered.

Model: AnywhereUSB / 5
Firmware: 1.80.15.44 (build 82002237_L awusb5 eos 1/16/2015 10: 33: 40a)
POST: 1.09.9.32 (release 82001552_A generic_travis hwdiag 8/27/2009)

No power on the USB devices

2

Hello,

You do not need to update the POST on AWUSBs since they already have the latest versions.

If the USB devices aren’t powered, it’s probably because the AWUSB isn’t connected/installed successfully.

I suggest reviewing the Quick Start Guide first:

http://ftp1.digi.com/support/documentation/AnywhereUSB_Quick_Start_Guide_10302014.pdf

If that doesn’t help, look through the many AWUSB KB articles:

http://www.digi.com/support/kbase/?osvid=0&sfid=45&QueryExpr=

3

I have the same problem.

“Driver Status: Connection Successful to Remote Hub At …”

but No power on the USB devices

4

Model: AnywhereUSB/2
Firmware: 1.82.16.41 (build 82002116_L2 awusb2 eos 6/16/2015 9:19:40a)
POST: 1.09.9.32 (release 82001552_A generic_travis hwdiag 8/27/2009)

Windows 8.1 x64

5

What is the connection status in the AnywhereUSB config utility?

Are there any errors in Device Manager?