I have acquired a few units (v1) that were originally fitted to railway vehicles as part of the remote monitoring system. I am going to build a Wi-fi access point and was also interested in using the GPS facility so we could locate the vehicle when out on hire.
We have servers available that we can install a “listening script” or suchlike on of necessary.
Thanks
1 Like
Hi and welcome to Digi Forums.
The GPS in these devices can be used out of the box to send the information (NEMA) to a TCP/UDP server.
You can also just get the information from the web interface / cli
You can find details of that in the User Guide: https://www.digi.com/resources/documentation/digidocs/90001019/default.htm#containers/cont_transport_config_positions.htm%3FTocPath%3DConfiguring%2520telemetry%2520(GPS)%2520|_____0
Please note that these devices are old and are not supported anymore (hardware/firmware)
Thank you
Regards
Alex
Digi Technical Support Engineer