Can't get pro module to draw more than 60ma

Can’t get pro module to draw any current more than 60ma WHEN TRANSMITTING, as if it were a standard xbee module.
The power level is set to 4 and I can tell that it’s transmitting because my application is receiving A/D data from the receiving module. The receiving mod is also a pro module.
The transmitting module should be drawing close to 200ma. Have tried two different pro modules with same results. The firmware is 10EC. The latest.

The module you are using has its transmitter on for only a ms or so when it is transmitting. In order for you to see the actual current draw of 200mA, you need to interface with the radio at 115.2kbps and just about stream data.