Old units:
Model: TransPort WR31
Part Number: WR31-L52A-DE1-TB
Serial Number: 705166
FW Version: 6.1.2.2 (May 18 2018 09:37:43)
Image Number: 0
Boot Version: 7.63u
New units:
Model: TransPort WR31
Part Number: WR31-M52A-DE1-TB
Serial Number: 771810
FW Version: 6.1.3.5 (Jul 17 2018 14:26:44)
Image Number: 0
Boot Version: 7.63u
Hi
a bacckup from old will not work on new as they use diffrent modules from diffrent companys.
you can modify the backup from the old to include the settings for the new units by adding tags from the new module.
this would be added to the bottom of the config.da0
you will need to check the configuration settings are what is needed
def_route 0 ll_ent “ppp”
def_route 0 ll_add 1
ppp 1 name “W-WAN (LTE)”
ppp 1 phonenum “981#”
ppp 1 r_chap OFF
modemcc 0 asy_add 2
modemcc 0 info_asy_add 3
modemcc 0 init_str “+CGQREQ=1”
modemcc 0 link_retries 350
modemcc 0 stat_retries 30
modemcc 0 check_reg 3
modemcc 0 check_reg_2 3
modemcc 0 sms_interval 1
modemcc 0 sms_access 1
modemcc 0 sms_concat 0
modemcc 0 sms_access_2 1
modemcc 0 sms_concat_2 0
modemcc 0 init_str_2 “+CGQREQ=1”
modemcc 0 link_retries_2 350
modemcc 0 stat_retries_2 30
cmd 0 asyled_mode 1
ppp 1 cdma_backoff OFF
ftpcli 0 hostname “ftp1.digi.com”
ftpcli 0 directory “support/firmware/transport/TELIT_carrier_firmware”
Hope that helps