Connect ME 20-pin header

Embedded Devices Plug N' Play
1

What is the manufacturer name and part number for the 20-pin header on the Connect ME?

On the same note, what would the appropriate part number be for the female 20-pin connector on your development board?

2

The manufacturer is Samtec (http://www.samtec.com).

The part number is not a straight forward issue. The Samtec concept is that you build your part number based on your needs.

Follow the follow steps to create your header’s part number:

  1. Go to Samtec’s web site.
  2. Perform a specifications search on part number FTS-110-01-F-DV-TR (this is the Samtec part number for the 20-pin header on the Connect ME module itself.
  3. The resulting page should provide with a listing on “mates with” connectors. Select CLP.
  4. From the CLP Series Overview page, at the top of the page is a link to “Build A Part Number”. Select this link.
  5. From this page you can select the options you desire and validate your generated part number.
3

How about the JTAG connector part number?

Cheers,
-chris

4

http://www.samtec.com/ftppub/deutsche_version/FTE_D.PDF

5

Hi,
is possible to find somewhere jtag pinout and jtag orientation on digi module (where is the first pin?)

Thanks Jirka

6

Hi,

I the ME development board schematic has this info.

I have used this to make an adapter so that I can plug a JTAG ME into my application board and it works fine.

My DO guy is on holiday at the moment but I can look out details of the adapter circuit next week if you are still having problems finding what you need