Creating Network with XBee Pro Series 2C XBP24-CZ7WIT-004

I want to create a network with my XBee Pro Series 2C XBP24-CZ7WIT-004 modules.
I have many of them.
In my network i want to have one coordinator and multiple end devices.
Which function set should i use and how can i configure my modules as coordinator and end devices individually?
Thanks for your answers.

By default S2C modules are configured to act as ‘Router’.

To set it as Coordinator, change CE=1 [Enabled]

To set it as End Device, keep CE=0 and set SM=any non zero value i.e. enable anyone Sleep Mode.