| 
            
            
              Digi Device Discovery tool 'Error while saving the settings to the device operation timed out (code-2)'
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            1
           | 
          
            299
           | 
          
            December 13, 2022
           | 
        
        
          | 
            
            
              how check data transfer from coordinate to the end device via repeater in xbee XCTU software ?
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            1
           | 
          
            282
           | 
          
            September 15, 2022
           | 
        
        
          | 
            
            
              Sleeping End device sometime does not received response send from co-ordinator.
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            3
           | 
          
            255
           | 
          
            January 7, 2022
           | 
        
        
          | 
            
            
              Python device discovery
            
            
           | 
          
              
                 
              
           | 
          
            0
           | 
          
            240
           | 
          
            August 3, 2021
           | 
        
        
          | 
            
            
              how to unjoin end device from coordinator
            
            
           | 
          
              
                 
              
              
                 
              
              
                 
              
           | 
          
            4
           | 
          
            393
           | 
          
            December 30, 2020
           | 
        
        
          | 
            
            
              Digi One SP gives device locked on SCO Definitive
            
            
           | 
          
              
                 
              
           | 
          
            0
           | 
          
            258
           | 
          
            August 3, 2020
           | 
        
        
          | 
            
            
              Error in founding device s2d series
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            1
           | 
          
            350
           | 
          
            February 7, 2020
           | 
        
        
          | 
            
            
              End device not routing through router to connect to coordinator
            
            
           | 
          
              
                 
              
              
                 
              
              
                 
              
              
                 
              
           | 
          
            11
           | 
          
            1927
           | 
          
            December 26, 2019
           | 
        
        
          | 
            
            
              Connect Port TS no device found
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            1
           | 
          
            479
           | 
          
            September 29, 2019
           | 
        
        
          | 
            
            
              After booting server - device settings lost
            
            
           | 
          
              
                 
              
           | 
          
            0
           | 
          
            252
           | 
          
            September 5, 2019
           | 
        
        
          | 
            
            
              remote device type unknown?
            
            
           | 
          
              
                 
              
           | 
          
            0
           | 
          
            386
           | 
          
            July 26, 2019
           | 
        
        
          | 
            
            
              Device failed enumeration on USB/2
            
            
           | 
          
              
                 
              
              
                 
              
              
                 
              
           | 
          
            3
           | 
          
            665
           | 
          
            August 21, 2018
           | 
        
        
          | 
            
            
              The device hangs
            
            
           | 
          
              
                 
              
           | 
          
            1
           | 
          
            535
           | 
          
            May 30, 2018
           | 
        
        
          | 
            
            
              Xbee Data issues after extended sleep period.
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            1
           | 
          
            509
           | 
          
            May 9, 2018
           | 
        
        
          | 
            
            
              i search for end device, but no device found
            
            
           | 
          
              
                 
              
           | 
          
            0
           | 
          
            356
           | 
          
            March 7, 2018
           | 
        
        
          | 
            
            
              led diag does not blink and I can not found device to connect to the ethernet port
            
            
           | 
          
              
                 
              
           | 
          
            0
           | 
          
            390
           | 
          
            February 21, 2018
           | 
        
        
          | 
            
            
              Xbee S2C End device disconnected after extended sleep (15 min)
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            1
           | 
          
            515
           | 
          
            January 25, 2018
           | 
        
        
          | 
            
            
              Comunication Xbee S1 Coordinator to End Device
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            1
           | 
          
            396
           | 
          
            October 26, 2017
           | 
        
        
          | 
            
            
              This device cannot start (Code 10)
            
            
           | 
          
              
                 
              
              
                 
              
              
                 
              
           | 
          
            2
           | 
          
            911
           | 
          
            October 12, 2017
           | 
        
        
          | 
            
            
              How to link a INNR smart lamp to a XBEE S2C coordinator
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            3
           | 
          
            644
           | 
          
            September 6, 2017
           | 
        
        
          | 
            
            
              Hi All I want to connect the raspberry Pi to the digi device cloud with free trial account....can can any one help me..?
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            3
           | 
          
            874
           | 
          
            June 6, 2017
           | 
        
        
          | 
            
            
              How can the end device(xbee s2c) select his parents?
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            5
           | 
          
            787
           | 
          
            February 27, 2017
           | 
        
        
          | 
            
            
              AnywhereUSB/2 error 38, no connectivity to USB device until restart server
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            5
           | 
          
            1501
           | 
          
            February 3, 2017
           | 
        
        
          | 
            
            
              how to enable 4 adc's of s2c end device
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            3
           | 
          
            507
           | 
          
            October 17, 2016
           | 
        
        
          | 
            
            
              Why does we use NJ0/NJFF for Coordinator to set End device's parent to nearby R in xbee s2c?
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            1
           | 
          
            503
           | 
          
            October 14, 2016
           | 
        
        
          | 
            
            
              I want to know why end devices leave the network in xbee s2c.
            
            
           | 
          
              
                 
              
              
                 
              
           | 
          
            5
           | 
          
            778
           | 
          
            October 14, 2016
           | 
        
        
          | 
            
            
              End device in Mesh network
            
            
           | 
          
              
                 
              
              
                 
              
              
                 
              
           | 
          
            3
           | 
          
            1349
           | 
          
            October 4, 2016
           | 
        
        
          | 
            
            
              Arduino+XBEE+ConnectPort data via Arduino's Serial class
            
            
           | 
          
              
                 
              
              
                 
              
              
                 
              
           | 
          
            4
           | 
          
            648
           | 
          
            September 15, 2016
           | 
        
        
          | 
            
            
              Where can I get the Digi Connect Programmer for this device.
            
            
           | 
          
              
                 
              
              
                 
              
              
                 
              
              
                 
              
           | 
          
            3
           | 
          
            980
           | 
          
            July 1, 2016
           | 
        
        
          | 
            
            
              Can xbee routers scan end device (in range) and get rssi value? is this possible with xbee? or Is there any other way?
            
            
           | 
          
              
                 
              
              
                 
              
              
                 
              
           | 
          
            6
           | 
          
            1263
           | 
          
            May 13, 2016
           |