network with a coordinator,a router and a end device

XBee & XBee Gateway XBee - 802.15.4
1

hello,

I would like make a network with a coordinator, a router and a end device.

I want send a signal from end device to coordinator passing by the router.

Xbee PRO are serie 1 and are the same firmware.
I use the the firmware XBP24 version 8014 witjh the function set “XBEE PRO ZIGBEE COORDINATOR AT(BETA)” for the coordinator. I use the function set “XBEE PRO ZIGBEE ROUTER AT(BETA)” for the router and the function set “XBEE PRO 802.15.4” for the end device.

I have tried several adress configuration but the system don’t operate.

Thank you for your help,

Guillaume

2

I have the same problem. I need also help.
I tried to do this, (http://www.digi.com/support/kbase/kbaseresultdetl.jsp?id=2194)
but got no success.