Digi AnywhereUSB/2 Multi Host support?

I have a AnyWhere USB/2 and reading the screenshots from the manual, it seems to support the multi-host support, like:
192.168.10.x = Group 1 with a USB device
192.168.10.y = Group 2 with another USB device

but if I open the web interface I cannot see the place where I can configure that.

Is because I am using old firmware / drivers, or Anywhere USB/2 does not support this configuration?

The AnywhereUSB/2 model does not support the “Multi-host connections” (MHC) feature.

Only the AnywhereUSB/5 M and AnywhereUSB/14 models support the MHC feature.

Here’s a related Digi KB article: