GOODMORNING
I HAVE many comp using 4 serial ports isa cards, but i need to change many of those cards and comp by PCI ones
but i have a problem, my app is an old msdos program, i tried to fix it but adress and irq are too different
im looking for a tsr program or nothing else to make it work …
sorry for my english and thx for help
eric faure
Hello Eric,
Unfortunately, there is no good solution for you. There are no DOS drivers for any of Digi’s PCI type adapters.
About the only thing you can do is try to find motherboards which still hae an ISA slot. There may not be any manufacturers who continue to make these.
Hello Eric,
You could use a Digi Classic PCI adaptor in stead of a NEO card.
I had the same type of problem with the classic card,
however I solved this by writing a small programm which had to be run before the original MSDOS programm was run.
This programm looked very much like the configuration program of DIGI, however that programm did not do what it was supposed to do.
I wrote a program myself that:
a: Tells you how it is installed by the bios and
b: sets it to the I/O and IRQ you want.
If you are interested give me an e-mail at
Vergeerp@wxs.nl
( I am also working on a solution for the NEO card, but
that is much more complicated)
Regards,
Peter