Hello.
I just received a brand new Digi PortServer CM32. I am able to login through the console and set an IP; however, the Ethernet interface does come up correctly. I’ve tried using a dumb switch and cross over cable, but I still cannot access the IP (either access to the Digi PortServer CM32 or access from Digi PortServer CM32 to anything else). The link light comes on, but I still cannot get any network access.
Lastly, when I do a ‘ifconfig’ via the console port I see eth0 with the IP I set and I also see eth0:1-32 with 192.168.101.# (‘#’ being an incrementing number).
Thank you.