DIGI WR11 losing LAN connection after a number of hours

Digi TransPort WR (Series)
,
1

Hi All

I’ve got a WR11 that I’ve set up cellular and a LAN DHCP server on Eth 0. The DHCP server is assigning addresses to the devices on my network but no traffic is passing through to the internet. I can configure the WR11 in the remote manager so I know that is set up correctly. Can anyone suggest where to look for a setting that is blocking traffic from the WAN?

If I do a factory reset and setup my ETH 0 and DHCP on the GUI it works ok. But then when the LAN link disconnects , the Windows machine says there is a problem with the DNS server.

I know its a discontinued unit but I really want to get this resolved.

The log file on the DIGI doesn’t show anything strange.

I can ping ok from the DIGI console, out. But can only ping internally IPs on the local network on the Windows machine. But when you try and use edge and connect to say BBC it get resolve the address.

Regards

Paul
Regards

Paul

2

@Phillips, are the LAN-side devices all configured to receive a DHCP address from the WR11, and can you access the devices to see if they’re getting a network connection and have the Default Gateway address configured correctly?

Also, is the network traffic for this application all from the LAN devices outward via the cellular connection, or are you instead trying to access the LAN devices from the WAN side (IP Forwarding)?