I have set-up a mesh network with an X4 as the gateway and 2 digimesh 900(not hp) xbee’s Through the X4 I can see them and remote configure them, but they will not send a periodic sample after each node wakes. On the gateway it is set to sm 7 with so 5 and it is in api mode.
on both nodes the dl and dh match the gateway’s xbee address with sm 8, so 2, sp 84000, st, 60000, IR 65000, and in api mode.
Am I missing something? I would post the config files but don’t see an add attachment button.