hi ı want to create sensor mesh network with three xbees2 as one of coordinator,one of router,one of end device?

XBee & XBee Gateway ZNet 2.5
, , , ,
1

ı confıgured xbees using with x-ctu as;
Coordinator;
Firmware:zigbee coordnator apı
PAN ID:0
SCAN CHANNELS:1FFE
OP ID:799142BCC8A(automatşcally assigned)
ch:7(automatşcally assigned)
sh:13a200
sl:40e66e4f
my:0(automatic)
dh:0
dl:ffff
apı:1
router
Firmware:zigbee router at
PAN ID:0
SCAN CHANNELS:1FFE
OP ID:0(automatşcally assigned)
ch:0(automatşcally assigned)
sh:13a200
sl:40cc0046
my:fffe(automatic)
dh:13a200
dl:40e66e4f
d3:adc
ır:64
end device
Firmware:zigbee end device at
PAN ID:0
SCAN CHANNELS:1FFE
OP ID:0(automatşcally assigned)
ch:0(automatşcally assigned)
sh:13a200
sl:40cc015b
my:fffe(automatic)
dh:13a200
dl:40c0046
d2:adc
ır:64
cycle sleep mode

ın this confıuration,there are one sensor in router and end device.ı took apı frame from router but ı didnt take apı frame from end devide.router cant send the end device ınformatıon.
How can you solve this situation?

2

Are you using hardware flow control on the End device and your device connected to the end device?

3

ı made cts flow control form digital pın in end device.End devic only connected to sensor.