howxbee how to set up a correct DH DL on the repeater xbee?

XBee & XBee Gateway XBee Programamble (S2C & 900 HP)
1

Thanks. I’m using zigbee xbee s2
I set the DH DL on the end point Xbee to the repeater and set the DH DL on the repeater to the coordinator. i power up the repeater(middle xbee) without the arduino, the serial data won’t send through the repeater from end point xbee to the coordinator.

2

Zigbee can route the packets directly. Set the DH & DL of the end point to the SH & SL of the coordinator and set the DH & DL of the coordinator to the SH & SL of the end point. The repeater will automatically forward the packets without needing to be addressed.

3

as the Router is configured to operate as a repeater between the coordinator and the end point.