Hi! I’m quite new using xbee. Currently I’m using 2 Xbee pro S2, i having trouble that the two xbee can’t communicate as in, in the terminal tab I type something it suppose can send over to other Xbee. But for my case I can’t. I need help!!!
Hi,
Program one module as Coordinator, other as Router, Set same PAN ID and SC on both the modules, set DH and DL values properly then send the data. Issue the following in sequence in the Terminal tab.
+++
ATDL=dlvalue
ATDH=dhvalue
(wait for timeout)
[push data]
Please refer the product manual at the following link, http://ftp1.digi.com/support/documentation/90000976_G.pdf
which gives more information about the ZigBee networks.
Regards!
Hi kavya, thanks for your reply! Yes i did that. But when i type on the Coordinator terminal tab, it came out double letters. how do i solve this? while the router is working fine, able to type something and send over to the coordinator.
Thank you.
I guess digi tech support can help you in this.
Create a case at the following link, http://www.digi.com/support/eservice/login.jsp?p=true
Attach .pro files of the modules and explain the issue.
Regards!
Hi,
What firmware vrsion do you use?
For xbee pro S2 it’s 2x64 versions (2164 for coordinator and 2364 for router)
regards,
Stephane
Hi, I using 208C (coordinator) and 228C(router).
Set the DH and DL values are correct, then send the data module, set the same PAN ID and the SC. Issued the following order in the terminal label.