IO Expansion Connector for ConnectCore iMx6ul SBC Pro

I have ConnectCore SBC Pro iMx6ul board. In the hardware reference manual:
In both ds-cc-6ul-sbc-pro.pdf and the hardware reference manual PDF documents, I have hard time to figure out IO Expansion J27 for two CAN ports.

In the hardware reference manual:

The two CAN ports are available on a 6-pin, 1.25 mm pitch expansion connector. The following table shows the pinout of the CAN expansion connector (J27):

Which connector is J27?

There are two 14-pin connectors. Are they IO-Expansion Connectors?

Thank you,
David Zhou

I found the CAN connector on the Board.
Thank you