Have a customer attempting to connect a Multi-Tech modem to a AccelePort 16em adapter. No matter what I’ve tried, I can’t get the modem to respond.
We’re using a Digi cable for the connection.
I can connect using “cu -l ttya01” but get no response at all from the various “AT” commands I’ve tried.
I suspect this is something simple, but am at the end of my rope for what else to try.
I’ve looked at the knowlege base document that discusses configuring multitech modems under Unix, but it instructs to issue AT commands to the modem, which don’t affect anything.
Someone please help before I go insane!!!
Here are the current port settings:
ditty -a /dev/ttya01
onstr \033[5i offstr \033[4i term ansi
maxcps 100 maxchar 50 bufsize 100 edelay 100
-forcedcd fastcook -altpin -fastbaud (9600) -printer
eia232 rtspace -dtrpace ctspace -dsrpace -dcdpace
DTR+ RTS+ CTS- CD- DSR- RI-
startc = 0x11 stopc = 0x13
-aixon astartc = 0x0 astopc = 0x0
-2200flow -2200print
speed 9600 baud; ispeed 9600 baud; ospeed 9600 baud; line = 0(tty);
intr = DEL; quit = ^; erase = ^H; kill = ^U; eof = ^D; eol = ^@;
swtch = ; susp = ; start = ^Q; stop = ^S;
-parenb -parodd cs8 -cstopb hupcl cread -clocal -loblk
-ortsfl -ctsflow -rtsflow
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -iuclc
-ixon -ixany -ixoff
-isig -icanon min = 4 time = 0 -xcase -echo -echoe -echok -echonl -noflsh
-iexten -tostop -xclude
-opost -olcuc -onlcr -ocrnl -onocr -onlret -ofill -ofdel
-isscancode