I need to use a Digi One/PortServer TS 2/4 to allow a Windows2000 machine to act as a pass-through. In other words I need to have the windows box allow coms between port a and port b, and between port c and port d. ports a and c are terminals, ports b and d are Sparc serial outputs. I also need to allow for the windows 2000 machine to also act as port a or c sometimes.
Please somebody, just get me started. I was thinking of using realport.
It seems there should be a better way then running all the data through the 2000 box. The only way i can think to do it is through a software program. It would probably have to be something custom using the real port drivers for 2000/NT. If you didnt have to monitor the information you could just use the auto connect. It might be easier all around if you can autoconnect the terminals and monitor the aux port of the terminals for information.