Problem with Wi-ME-S

Embedded Devices Plug N' Play
1

Hello,

I have a big problem with getting stared. My Wi-ME-S module only blinks 3 times yellow LED, wait for about 5s, blink once and starts from beginning.

I have connected the /INIT pin to 3v3 via 10k resistor, supply to 3v3 and gnd to gnd. All others pin are left “in air”.

Router’s SSID is set to “Connect”, encryption is off, DHCP server is running. Configuration was tested with laptop and desktop PC.

Can someone help me?

Best regards,
Kuba

2

Hi Kuba,
INIT pin should be left floating. Only ground it when you want to reset the wime back to factory defaults.

another option is to put the wime on the digi prototype board for further testing.
Keith