Hi,
Earlier X868LP worked fine but when I configured single chip as Rx/Tx both, chip started misbehaving.
I kept DH and DL address of both the Xbees as 0H and 0L. rest of the settings default.
when I test for +++ command no response from zbee, but when I keep 2 xbees on and hit +++ command, it sends +++ to other xbee.
When I try to send string, I receive ASCII value at other side.
I don’t know what’s wrong with ZigBee and why it misbehaving.
help me on this.
thanks in advance.
abhinav