Rabbit BL2100 to BL2120 Conversion

Rabbit
1

I am trying to use a BL2100 with the BL2120 processor, the one without the RJ45 port, through flashing the board with WRITE_IDBLOCK_050306.c and changing the board type to BL2120. After that, whenever any command is given to a DAC channel, it goes to +10V and will not change despite other commands.

Is there more that needs to be changed in the WRITE_IDBLOCK program than the board type? I have tried this on three rabbits and the problem doesn’t exist with the RJ45 processor.

2

I was able to calibrate the DAC and ADC channels while the board was configured as a BL2120, so the problem must lie in my program or library files. :rolleyes: