series 2.5 ZNet xx47

XBee & XBee Gateway XBee - Zigbee
1

Hi,

I’ve got two devices, one coordinator and one end device. I can send an AT command like ATND. TX is flashing on the coordinator and then the RX and RSSI are flashing on the endpoint. Problem is that the Endpoint does not transmits her answer.

What could be the problem?

Roel

2

Check to make sure they’re on the same PAN ID and using the same channel. Do you also have other coordinators in the area that this end device might be associated to? Was it maybe asleep when the ND was made?