Dear Digi,
we have some problem with AnyWhere USB /2. We have connected them with a server installed on a VMware virtual machine. On the server we have installed Microsoft Windows Server 2008 Standard Edition x64.
Sometimes server crash and goes in blu screen.
I attach the MiniDump, the dump analysis and the Digi’s driver version.
Could you help us please?
Thank you very much
Mike Reano
We have done some stress test in “low resource” state with “Driver Verifier” utility and when we stress driver “IonHub64.sys”, server crash!
Do you have any news about it?
Could you confirm if this driver version is fully supported on Microsoft Windows Server 2008 std. x64?
Thank you very much for your help.
Hi,
i have a similair problem on a VM server W2008R2 enterprise
----anywhere usb driver is causing bsod
please help
mini dump BSOD
Awvusbd64.sys Awvusbd64.sys+f316 fffff88002fc5000 fffff88002fde000 0x00019000 0x4c0ed2a6 9-6-2010 0:30:46
Alex
mreano, are you using 2008R2 or old 2008? I’m on R2 and am facing similar issues but with a prolific serial dongle only (http://forums.digi.com/support/forum/viewthread_thread,9844).
What do you have attached?
Updating the device with newer firmware and drivers will solve some known issues.
you can download the driver and the firmware from Digi website
http://www.digi.com/support/productdetail?pid=3747&type=drivers
and
http://www.digi.com/support/productdetail?pid=3747&type=firmware