What kind of hardware that it need to upgrade the firmware from XB24C (ZIGBEE TH Reg) to XB24C (DigiMesh2.4 TH) ?

XBee & XBee Gateway XBee - 802.15.4
, ,
1

Hello, i’m newbie in the world of ZigBee…

I want to know how my XBEE(XB24C/ZIGBEE TH Reg) can do Digimesh Networking. As we have known that XBEE(XB24C/ZIGBEE TH Reg) only can do Mesh Network but can not do Digimesh Network.

As from information I got from the last answer that I was advised to upgrade the firmware by using the right hardware.

But I don’t know what kind of hardware to use or is there any idea to do Digimesh Network with my device.

Anyone Please tell me how to do Digimesh Network with my XBEE(XB24C/ZIGBEE TH Reg). Thanks for your attention :slight_smile:

2

You need an interface board such as the XBIB-U-DEV or similar board that has all of the required lines connected for firmware upgrades as outlined in the product manual. Generally that is Di, DO, RTS and DTR.