Xbee 868LP to XCTU 6.2 no answer

[keflex87]

Hello,

i want am connect a Xbee 868 (XB8-DMUSB002) with XCTU 6.2 over a FTDI-Cable (http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_TTL-232RG_CABLES.pdf). Unfortunately I get no response from the module if i add a module over XCTU. what is the bug?

Hardware connection:
PIN1 –> GND
PIN2 –> 3,3VDC
PIN3 –> FTDI-RXD
PIN4 –> FTDI-TXD

Trace on COM5:
send:
~…APe+++AT.
(7E 00 04 08 01 41 50 65 2B 2B 2B 41 54 0D )

reply:
nothing :blue:

thanks for your support
Andre

[mvut]

That is NOT a standard XBee 868 LP module. That is a Programmable module. Which means that it has a 2nd processor on board which you Must write and upload code to via a BDM programmer before it will do anything.