Can't read parameters from Programmable SMT module

Hi all,

Using an SMT interface board I was able to program a programmable ZB module, but I can’t read its parameters from X-CTU. The serial port is not in use. What can I do? Thanks in advance!

With programmable modules you can’t access the radio directly, you have to bypass the user-mcu. To do this, you have to enter the bootloader and send option “B” (Bypass), then the radio will be accessible for X-CTU (at 115200 bps!)

Also, you can flash “Serial Bypass” application, it will do the bypass thing automatically and the radio will be readable/writable from XCTU. Consult the Help on how to enter bootloader.