Configure DigiMesh for Coordinator to Multiple EndPoints Devices

XBee & XBee Gateway XBee - DigiMesh
,
1

Hi

I would like to understand what could be the best configuration settings to establish:

Coordinator -> Multiple EndPoint communications

Multiple End Points -> Coordinator

No communication between End Point needed.

I want to take advantage of DigiMesh to extend the network range.

2

What you are looking for is a classic Point to Multi-point addressing. That is, set the Coordinator to Broadcast (0xFFFF) and on the end devices, unicast. (Set the DL and DH of the End devices to the SL and SH of the Coordinator).