Trying to connect a j-link to a CC-WMX53-LX.
JTAG seems to work but for some reason halting doesn’t work when writing program to RAM.
J-Link found 3 JTAG devices, Total IRLen = 13
JTAG ID: 0x1BA00477 (Cortex-A8)
Connected to target
Waiting for GDB connection…Connected to 127.0.0.1
Reading all registers
Read 4 bytes @ address 0x7780D6E8 (Data = 0xE0623003)
Read 4 bytes @ address 0x00000000 (Data = 0xE59FF01C)
WARNING: CPU not halted after Reset, halting using Halt request
WARNING: CPU could not be halted
ERROR: Bad JTAG communication: Write to IR: Expected 0x1, got 0xF (TAP Command : 10) @ Off 0x5.
Resetting target
WARNING: CPU could not be halted
WARNING: Failed to read memory @ address 0x7780D6C8
WARNING: CPU could not be halted
WARNING: Failed to read memory @ address 0x7780D6C8
Downloading 4096 bytes @ address 0x70000000WARNING: CPU could not be halted
WARNING: CPU could not be halted
- Verify failed
Downloading 4096 bytes @ address 0x70001000WARNING: CPU could not be halted
WARNING: CPU could not be halted - Verify failed