We need to know all possible hardware configuration and configuration options for the Edgeport/416 16-port RS232 device. That is, how to write the IONPORT.ini for ComMappingSingleDevice=1 so we cover UMP, internal 930, etc. That is, both old and new hardware configurations of this device so we can set ports 1-16 to have COM port 3-18. No matter what serial number, device hardware internally and no matter which USB port.
That is, something like, but for the Edgeport/416.
[General]
ComMappingSingleDevice =1
; Set the Serial Ports to Com5 -> Com12
; Using an EP/8 with the internal UMP ;
[EP_SINGLE-0:1] PortName =Com5
[EP_SINGLE-0:2] PortName =Com6
[EP_SINGLE-1:1] PortName =Com7
[EP_SINGLE-1:2] PortName =Com8
[EP_SINGLE-2:1] PortName =Com9
[EP_SINGLE-2:2] PortName =Com10
[EP_SINGLE-3:1] PortName =Com11
[EP_SINGLE-3:2] PortName =Com12