We are trying to connect EMC Isilon nodes to our Digi ConnectPort LTS 32 but are unable to get it to work. The serial port is configured to the Isilon specification but the Isilon document references a NULL connection. Is this possible?
Based on the information in the link you provided, you will need to use a null modem serial cable (as opposed to a straight through serial cable) to connect the EMC Isilon to the ConnectPort LTS 32. FYI, null modem is also sometimes referred to as crossover.
I think this cable should work, if you can confirm that the EMC Isilon’s serial port is “DTE” and DB9 female: