ow to connect xbee wifi module to third party server

wifi module is in DHCP mode i want to connect to the third party server using this module

is their any suggestion how to connect the wifi module to sever? its very urgent

You need to query the radios DL command once it has associated with your application connected to the radio. Then you need to add that value to your data payload.

if one module i can able to query. if no.of is more than 10 that time its difficult to send the query to each module.

with out sending as query from server is any other way to connect xbee wifi module with server

No, there is no other way.

thank you very much

Try sending a Remote T command using the XBee’s IP services as a Broadcast (Chapter 4 of the manual). Only XBee modules should respond to it using an API frame that will include the modules IP address.

k, but without any query from the server i can able to communicate with tcp server by sending the one dummy packet to my server from xbee

Yes you could send one file with the radios IP in it from the radio to the server.