PORT to COM mapping (AnywhereUSB Plus)

USB Devices AnywhereUSB Plus
1

Is there currently a way to set the AnywhereUSB Plus COM port mapping programmatically or via a configuration file of some sort? I would like to be able to configure it such that USB serial devices plugged into port1 always maps to COM1, port2 maps to COM2 etc…

Thanks

2

Hello,

This is something the AWUSB Plus has no control over, it’s more of a question specific to the USB serial devices themselves. In other words, if there was no AWUSB Plus involved here and these USB serial devices were plugged directly into the PC, would you be able to do what you’re looking to do here? That would be a good question for the vendor of the USB serial devices in question.

3

Understood. Thanks for the reply.