Problem in configuring xbee S2C Coordinator - Router AT mode

I have configured two S2C modules for a simple RF communication in AT mode.

1.I have set the PAN ID to the same value in both the modules.
2. Set the destination addresses
3. Set CE to 1 in Coordinator module and CE to 0 in the Router module.

But still they are not communicating
Please help me out…

Try issuing a local network rest to your router (ATNR0). Also make sure that the mac address begins with 0013A200 and not just 13A200.

Hi, can you connect and
chat back and forth in XCTU utility ?