Problems with building my first application

Embedded Devices Linux
1

Hi, I recently got CC Wi-9C board and wanted to start programming it. When I followed “Building your first application” I got stuck at last step i.e. - running program on target board…
All previous steps works fine (no errors), but when I press “Run” Console outputs:
“make all
make: Nothing to be done for `all’.”
and in Progress tab process stuck at 74%

After some time problem message is shown:
“Remote Transfer Error (192.168.1.2). Remote path /tmp/ does not exist.”

Kubuntu is running on VMware Workstation which is installed on Windows 7 (64) PC…

Any suggestions?

Than You in advance!

2

Hi,

Find my vmware settings…
And from linux environment ping to you board.
If it is pinging network link is fine.

make sure that you have correct IP, gateway & netmask set in env variables in uboot.

3

Hi!
Ping did work, but I still can’t upload my programm.

When I run Kubuntu from VMWare on XP, everything works fine…
So I gues I’m returning to XP [:)]

4

I have the same Problem right now! I can use SSH und Serial Communication, so my Module is online.

The upload stuck at 74% and nothing happens. I’M using the ConnectCard™ for i.MX28 with Development Kit.