Remote AT commands as router (using XStick)

XBee & XBee Gateway XBee - 802.15.4
, ,
#1

Hello,

When a gateway (X4 for instance) is set as a router, it is possible to modify every parameter of other routers in the same PAN ID (including remote router´s PAN ID).

I was wondering if this is possible to do as well with the XStick or another module set in router mode. How to send remote AT commands to set parameters from a router?

Sorry if this is somewhere in the forum already or manual, but I could not find it.

Regards,

#2

Sure as long as the nodes are all associated and the one you are sending the commands from is in API mode. You see remote AT commands are a function of API mode and have their own specific API frame.