with some circuit i made, i connect it on the PC and read the Xbee with the use X-CTU. that is on PC setting, i press Test/query then the result shows.
Communication with modem…OK
Modem type =XB24-B
Modem firmware version =2241
then on modem configuration i tried to read it but it says
"The modem configuration file was not found. would you like
to check the web site for updates?(recommended).then choosing Yes button but it says server reset. is there anyway i can update the XCTU, or download a file for offline workstation?
after downloading the file, it still pop-up to this
“The modem configuration file was not found. would you like
to check the web site for updates?(recommended)”
and i it just says that the firmware available was around 11xx please help me
It sounds like you have ZB firmware loaded on that module not ZNet 2.5, since the firmware version lists as 2241.
Here’s a link to the ZB module firmware page where you can get the firmware file to update XCTU with the ZB firmware:
http://www.digi.com/support/productdetl.jsp?pid=3430&osvid=0&s=365&tp=2